Hot-Rolled · EN 10025 / ASTM A6
Structural Steel Sections — Beams, Angles & Channels
A single, mill-certified source for the structural backbone of your project: I and H beams, equal and unequal angles, channels, flat bar and square bar — supplied in A36, S275 and S355, cut to your list and exported worldwide.
Product Range
Five core section families, one certified supply chain
As an independent structural steel sections supplier, Steel Rebar Germany consolidates beams, angles, channels and bar onto a single shipment — so your fabrication shop receives matched, traceable, ready-to-cut steel from one purchase order.
I & H Beams
Universal beams (UB), universal columns (UC), IPE, HEA and HEB sections for primary framing, portals and load-bearing columns.
Angles (L)
Equal and unequal leg angles for bracing, frames, lintels, trusses and connection cleats — clean rolled edges, consistent thickness.
Channels (U / C)
UPN parallel-flange and PFC tapered-flange channels for purlins, frames, edge beams and machine bases.
Flat Bar
Hot-rolled flat bar for stiffeners, base plates, gussets, cleats and general fabrication, in a full width-and-thickness range.
Square & Round Bar
Solid square and round bar for shafts, brackets, anchors, balustrades and bespoke fabricated components.
Need a custom section?
Send us your cutting list, BOQ or drawing and our export desk will price, cut and consolidate the full structural package.
Send Cutting List →Specifications
Structural steel grades & standards
Every grade below is supplied with a 3.1 mill test certificate confirming cast analysis and mechanical properties. Yield values are minimums for the governing thickness band.
| Grade | Standard | Min. Yield (Re) | Tensile (Rm) | Typical Use |
|---|---|---|---|---|
| ASTM A36 | ASTM A6 / A36 | 250 MPa | 400–550 MPa | General structural, US/Gulf projects |
| S235JR | EN 10025-2 | 235 MPa | 360–510 MPa | Light framing, secondary steel |
| S275JR | EN 10025-2 | 275 MPa | 410–560 MPa | General fabrication & building frames |
| S355JR | EN 10025-2 | 355 MPa | 470–630 MPa | Heavy load, long spans, infrastructure |
| S355J2 | EN 10025-2 | 355 MPa | 470–630 MPa | Impact-tested (–20°C), critical welds |
Ø Tolerances per EN 10034 (beams), EN 10056 (angles), EN 10279 (channels). Weathering (S355J0WP) & A992 available on request.
Why Steel Rebar Germany
Structural supply built on numbers, not promises
Where it’s used
Applications for structural steel sections
From single-storey warehouses to multi-level commercial frames, our sections carry load wherever speed, span and strength matter.
Commercial & industrial frames
Beam-and-column steel frames for warehouses, factories, malls and offices — fast to erect, easy to extend.
Infrastructure & bridges
S355 beams and plate girders for footbridges, culverts, pipe racks and heavy load-bearing infrastructure.
Pre-engineered buildings (PEB)
Channels, angles and built-up sections for purlins, bracing and PEB portal frames across the GCC and Africa.
Mezzanines & platforms
Flat bar, angles and beams for mezzanine floors, access platforms, walkways and equipment supports.
Oil, gas & energy
Impact-tested S355J2 sections for plant structures, skids, modules and offshore-adjacent fabrication.
Fabrication & OEM stock
Square bar, round bar and flats supplied to steel fabricators and machine builders as ready cutting stock.
The Buyer’s Guide
A reliable structural steel sections supplier for contractors & distributors
Choosing the right structural steel sections supplier is less about catalogue size and more about traceability, consistency and the ability to deliver a complete structural package on schedule. Steel Rebar Germany was built around exactly that problem: contractors and distributors across the GCC, Africa, Europe and Asia kept buying beams from one mill, angles from a second trader and channels from a third — then spending weeks reconciling certificates, tolerances and delivery dates. We consolidate the entire structural section range under one mill-certified supply chain so your steel arrives matched, traceable and ready to fabricate.
Hot-rolled sections, certified to the standard you specify
All of our beams, angles, channels and bar are hot-rolled and supplied against recognised standards — EN 10025-2 for European S-grades, ASTM A6 / A36 for US and Gulf specifications, with dimensional tolerances held to EN 10034 (I and H sections), EN 10056 (angles) and EN 10279 (channels). Whether your engineer has called up S275JR for a general building frame or S355J2 for an impact-tested infrastructure element, every heat ships with a 3.1 mill test certificate reporting the cast chemistry and mechanical properties, so your QA team and your client’s consultant can sign off without chasing paperwork.
Spec tip: S355 carries roughly 30% more yield strength than S275 for the same section size. On heavily loaded or long-span members, upgrading the grade often lets you drop a beam size — saving weight, freight and erection cost even at a higher per-tonne price.
Cut to length, bundled and tagged for your shop
Raw 12-metre stock is rarely what a fabrication shop actually wants. Send us your cutting list, bill of quantities or fabrication drawing and we will saw-cut each profile to length, bundle by mark number, tag for traceability and stage the order for loading. For reinforcement that ties into your structural package, the same shipment can carry cut-and-bend rebar to BS 8666 and welded wire mesh — one supplier, one set of documents, one certified delivery.
Export-ready from quote to quay
Steel Rebar Germany is an English-language B2B exporter first. Structural sections are loaded by container or break-bulk to over 40 ports, protected with rust-inhibitor and secure bundling for the voyage, and accompanied by full export documentation — commercial invoice, packing list, certificate of origin and the governing mill certificates. A dedicated export desk owns your order end to end, so a buyer in Lagos, Jebel Ali or Mombasa gets the same predictable, same-day quote and the same traceable steel as a buyer next door.
- Complete range: I/H beams, equal & unequal angles, UPN/PFC channels, flat bar, square & round bar.
- Grades on the shelf: A36, S235JR, S275JR, S355JR and S355J2; specialist and weathering grades on request.
- Documentation: 3.1 mill test certificate on 100% of heats, plus full export paperwork.
- Service: cutting to length, bundling, marking and consolidation with rebar, mesh and coils.
If you are scoping a project or building distributor stock, our team can review your specification, suggest the most economical grade-and-section combination, and return firm export pricing — typically within 48 hours.
FAQ
Structural steel sections — common questions
We supply carbon structural steel in ASTM A36, EN 10025-2 S275JR and S355JR as standard, with S235JR, S355J2, A992 and weathering grades available on request. Every section ships with a 3.1 mill test certificate confirming chemistry and mechanical properties.
All forms — I/H beams (UB, UC, IPE, HEA, HEB), equal and unequal angles, UPN and PFC channels, flat bar and square bar — can be saw-cut to your exact cutting list, bundled, tagged and loaded for container or break-bulk shipment.
Yes. Steel Rebar Germany exports structural sections by container and break-bulk to over 40 ports across the GCC, Africa, Europe and Asia, with full export documentation, rust-inhibitor protection and a dedicated export desk for every shipment.
S275 has a minimum yield strength of 275 MPa and S355 a minimum of 355 MPa. S355 carries more load for the same section size, allowing lighter, more economical framing on heavily loaded spans, while S275 suits general fabrication and lighter structures.
Minimums depend on destination and mode. We handle full-container and mixed-container loads as well as break-bulk parcels, and can consolidate structural sections with rebar, mesh and coils to make up an economical shipment. Share your requirement and we will advise the best loading plan.
Export Desk Open
Get firm pricing on your structural package
Send your cutting list, BOQ or drawing. We’ll quote beams, angles, channels and bar — mill-certified, cut to length and ready for export — typically within 48 hours.