Africa Export Series

Steel Rebar Export to Kenya

German-standard B500B reinforcing steel — EN 10080 compliant, fully documented with Mill Test Certificate and Certificate of Origin — available for export to Mombasa and Kenyan project sites.

Request a Quote → Export Overview

DIN 488 · EN 10080 Mill Test Certificate EN 10204 3.1 Seaworthy export packing

Rebar Kenya: Supplying German-Standard Reinforcing Steel to East Africa

Kenya’s construction sector is among the most active in sub-Saharan Africa, driven by large-scale infrastructure investment, affordable housing programmes, and commercial development across Nairobi, Mombasa, and secondary cities. International project developers, contractors, and importers sourcing rebar for Kenyan projects increasingly specify quality-assured, traceable reinforcing steel — and German-standard B500B to EN 10080 is a recognised benchmark for high-ductility structural performance.

We supply hot-rolled B500B deformed bars in diameters 8–40 mm and standard lengths of 6 m, 12 m, and 18 m, alongside B500A/B coils (6–16 mm) and welded reinforcing mesh. Every consignment is backed by an EN 10204 3.1 Mill Test Certificate, traceable to the heat of origin.

Standard Comparability: EN 10080 B500B vs KS / BS 4449

Kenya’s dominant reinforcing-steel standard is KS 02-114 (aligned with BS 4449), which specifies Grade B500B (500 MPa characteristic yield, high ductility). The German/EU designation B500B under EN 10080 shares the same core mechanical targets: 500 MPa minimum yield strength, characteristic tensile-to-yield ratio k ≥ 1.08, and minimum uniform elongation Agt ≥ 5.0%. The rib geometry requirements differ in detail between the two standards.

Comparability note: EN 10080 B500B is technically comparable to KS/BS 4449 B500B in its principal mechanical properties. We do not claim formal approval under KS standards; buyers are responsible for confirming local regulatory acceptance with the relevant Kenyan authority (KEBS) for their specific project.

Key Mechanical Parameters

Parameter	EN 10080 B500B	KS/BS 4449 B500B
Min. yield strength (Re)	500 MPa	500 MPa
Tensile/yield ratio (k)	≥ 1.08	≥ 1.08
Uniform elongation (Agt)	≥ 5.0 %	≥ 5.0 %
Ductility class	High (B)	High (B)

Product Range for Kenyan Projects

Standard diameters and section weights for structural calculation and procurement planning.

Diameter (mm)	Weight (kg/m)	Cross-section (mm²)	Typical use
10	0.617	78.5	Slabs, light walls
12	0.888	113	Beams, columns
16	1.58	201	Columns, footings
20	2.47	314	Heavy beams, piles
25	3.85	491	Bridge piers, deep foundations
32	6.31	804	Large columns, infrastructure

Weight per metre is calculated by the formula kg/m = d²(mm) × 0.00617. Full diameter range 8–40 mm available; contact us for cut-and-bend or coil requirements.

Shipping & Logistics to Mombasa

Container and break-bulk options with seaworthy packing for East African ports.

🚢

Port of Entry

Mombasa is Kenya’s primary deep-water port and the main gateway for rebar imports into East Africa. Transit to Nairobi and upcountry sites by road or SGR rail.

📦

Container & Break-Bulk

Standard bars ship in 20 ft or 40 ft containers in seaworthy bundles of approximately 2 tonnes. Larger project volumes may ship break-bulk for cost efficiency.

📋

HS Code & Customs

Rebar is typically classified under HS 7214 (bars and rods of iron/steel). We prepare a full packing list and commercial invoice to support Kenyan customs clearance.

Export Documentation

Full paperwork for every shipment — required by Kenyan customs, project engineers, and financiers.

📄

EN 10204 3.1 Mill Test Certificate

Third-party certified test report from the steel mill, confirming heat composition and mechanical test results. Traceable to individual production heats.

🌍

Certificate of Origin

Issued by the relevant German Chamber of Commerce confirming German/EU origin — may be required for preferential duty treatment or project compliance.

✅

CE Declaration of Performance

Required under EU Construction Products Regulation (CPR) and accepted by many international project specifications as proof of conformity to EN 10080.

📦

Packing List & Commercial Invoice

Detailed bundle-by-bundle packing list with weights and dimensions. Commercial invoice in USD or EUR as required for LC/CAD payment terms.

View Full Export & Delivery Guide →

Frequently Asked Questions — Rebar Export to Kenya

Is German B500B rebar accepted on Kenyan construction projects?

EN 10080 B500B is technically comparable to KS/BS 4449 B500B in its principal mechanical properties (500 MPa yield, k ≥ 1.08, Agt ≥ 5.0%). Whether it is formally accepted depends on the project specification, the engineer of record, and any applicable Kenyan regulatory requirement. We recommend buyers confirm acceptance with KEBS and the project’s structural engineer before ordering.

What documents do I need to import rebar into Kenya?

Typically required: EN 10204 3.1 Mill Test Certificate, Certificate of Origin, commercial invoice, packing list, and bill of lading. Pre-export conformity assessment (PVOC) may be required under Kenya Bureau of Standards (KEBS) regulations. We supply all mill and origin documents; the buyer’s clearing agent handles PVOC and customs formalities.

How is rebar shipped to Mombasa from Germany?

Standard project quantities ship in 20 ft or 40 ft steel containers loaded with seaworthy bundles of approximately 2 tonnes each. Very large volumes may be arranged as break-bulk shipments. Transit time from German ports to Mombasa is typically several weeks depending on the shipping line and routing.

What diameters and lengths are available for export to Kenya?

We supply B500B hot-rolled deformed bars from 8 mm to 40 mm diameter in lengths of 6 m, 12 m, and 18 m. B500A/B coils in 6–16 mm are available for stirrup and mesh fabrication. Custom cut lengths can be discussed for project-specific requirements.

Can you supply both rebar and reinforcing mesh for a Kenyan project?

Yes. We supply welded reinforcing mesh to DIN 488-4 (standard and bespoke panel sizes) alongside straight bars and coils. Combined shipments can be arranged for full-project procurement packages. See our reinforcing mesh and B500B rebar pages for details.

Source German-standard rebar with full export documentation

Tell us your specification and destination port — we’ll respond with a detailed quotation.

Request a Quote →