Steel Rebar Export to Chile
B500B reinforcing steel to EN 10080 — technically comparable to Chile’s NCh204 A630-420H grade — supplied with full German export documentation for projects across the Región Metropolitana and beyond.
rebar Chile: Why German-Standard B500B Is Specified on Major Projects
Chile’s construction sector has grown steadily, driven by infrastructure investment, mining-support facilities, and urban residential towers in Santiago and Valparaíso. For projects requiring reliable mechanical properties and traceable documentation, German-produced B500B rebar — manufactured to EN 10080 and tested under DIN 488 — provides an internationally recognised standard of quality that specifying engineers and procurement managers can rely on.
Chilean reinforcing steel is governed by NCh204, and the primary structural grade is A630-420H (420 MPa min yield, high ductility). Our B500B grade offers 500 MPa minimum yield strength with high ductility (k ≥ 1.08, Agt ≥ 5.0%), making it technically comparable in ductility class to A630-420H. Buyers should note: we do not claim formal Chilean market approval or NCh204 certification — our product is certified to EN 10080/DIN 488, and direct comparability is a technical judgement for the specifying engineer.
Main Chilean Entry Ports
Cargo destined for Chile typically arrives via San Antonio (serving the greater Santiago hinterland) or Valparaíso (the major general-cargo terminal on the central coast). Both ports handle containerised steel and break-bulk shipments. For northern mining-region projects, Antofagasta or Iquique may be preferred discharge points. We can advise on the most cost-effective routing for your destination.
Shipping Mode: Container vs. Break-Bulk
For standard straight bar in 12 m lengths, break-bulk or flat-rack container shipping is typically used, with bars bundled in seaworthy packs of approximately 2 tonnes each and secured to vessel frames. For shorter cut-to-length bars (up to ~6 m), standard 20 ft or 40 ft containers can be loaded efficiently. Rebar coils and mesh panels also ship by standard container. We work with freight forwarders experienced in steel cargo to Atlantic and Pacific South American ports.
Product Range Available for Chile Export
B500B hot-rolled straight bar, B500A/B500B coils, reinforcing mesh, and cut-and-bend fabrication — all to DIN 488 / EN 10080.
B500B Straight Bar
Dia 8–40 mm, lengths 6–18 m (typically 12 m), high-ductility hot-rolled. Weight from 0.395 kg/m (8 mm) to 9.86 kg/m (40 mm).
Product details →Rebar Coils
B500A/B500B coil, 6–16 mm, for automated stirrup-bending and mesh machines. Typical coil weight 2–3 t.
Product details →Reinforcing Steel Mesh
Standard Q/R mesh panels and bespoke sizes (e.g. 6.0×2.3 m) to DIN 488-4. Reduces on-site labour significantly.
Product details →Export Documentation for Chilean Customs
Correct documentation is essential for smooth Chilean customs clearance. We supply a standard set with every consignment:
| Document | Purpose / Notes |
|---|---|
| Mill Test Certificate (EN 10204 3.1) | Chemical analysis + mechanical test results per heat/cast; signed by the mill’s inspection authority |
| Certificate of Origin | Confirms German manufacture; required for customs tariff classification |
| Commercial Invoice | CIF/CFR value, HS code 7213.10 (coils) or 7214.20 (straight bar) |
| Packing List | Bundle-by-bundle breakdown: diameter, length, quantity, net/gross weight |
| Bill of Lading / Sea Waybill | Issued by carrier; required for port release at San Antonio/Valparaíso |
| CE / Declaration of Performance | Available for EN 10080 product where required by project specification |
HS codes for steel rebar typically fall under 7213.10 (hot-rolled bars in irregularly wound coils) or 7214.20 (deformed straight bars). Buyers are responsible for verifying applicable import duties with Chilean customs (Servicio Nacional de Aduanas).
Technical Comparability: B500B vs. NCh204 A630-420H
For engineering reference — formal approval under NCh204 is the responsibility of the specifying engineer and project authority.
| Property | EN 10080 B500B (our product) | NCh204 A630-420H (Chilean grade) |
|---|---|---|
| Min. yield strength (Re) | 500 MPa | 420 MPa |
| Min. tensile strength (Rm) | 540 MPa | 630 MPa |
| Strength ratio k = Rm/Re | ≥ 1.08 | ≥ 1.15 (high ductility) |
| Min. total elongation Agt | ≥ 5.0 % | ≥ 9.0 % |
| Surface | Ribbed (transverse + longitudinal ribs) | Ribbed |
| Standard | EN 10080 / DIN 488 | NCh204 |
Frequently Asked Questions — Rebar Export to Chile
Does your B500B rebar meet Chilean NCh204 requirements?
Which Chilean ports can you ship to?
What is the typical lead time for a steel rebar export to Chile?
Can you supply rebar in smaller test quantities?
What documents do I need for Chilean import customs clearance?
Source German-standard rebar with full export documentation
Tell us your specification, quantity, and destination port — we’ll respond with a detailed quotation for your Chilean project.
